Fast-fluid HA600 User Manual download pdf (Page 28)

FAST & FLUID MANAGEMENT

HA200 / HA400 / HA600 - V1.71 – 21-07-2004

V MAINTENANCE

page 28

Operation

C - Monthly maintenance

Remove back panel.

Clean dust from computer

cavity and spilt colorant

inside machine.

Check pump valve for

possible malfunctions

(e.g. leakage or blockage).

Attention! MOVING PARTS CAN CAUSE INJURY. Always turn off power

(e.g. by pressing emergency stop) before accessing moving parts.

D - Flat screen maintenance

Do not use any wetted materials, detergents, solvents, thinners or

other cleaning agents to clean the TFT flat-screen monitor. Its

surface is very delicate!

How to keep your Flatscreen clean:

•

Wipe off water droplets or oil immedeately. If you leave the droplets for a long time, staining and

discoloration may occur.

• If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth. The

desirable cleaners are water, IPA (isopropyl alcohol) or Hexane. Do not use ketone type materials

(ex. Acentone), ethyl alcohol, toluene, ethyl acid or methyl chloride. It might permanent damage to

the polarizer due to chemical reaction.

•

Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This

removes dust and other particles that can scratch the screen.

•

Do not apply pressure to the screen surface when wiping it clean.

• Do not pour or spray any liquid directly onto the screen or case of the LCD monitor. Chemical

cleaners have been reported to damage the screen or case of the LCD monitor.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

No comments

Fast-fluid HA600 User Manual Page 28