Fast-fluid X-Smart User Manual download pdf (Page 19)

Installation X-Smart V 1.2

4 Installation

4.1 Turning on the machine

1. Connect the power cable to the wall socket. When the

machine is operational, you hear two ’beeps’.

2. Make sure that the emergency stop switch is released.

3. Set the computer switch to ‘ON’.

4. Run the dispense software.

4.2 First use

1. Fill and place the brush unit. See § 3.3.3.

2. Fill the canisters correctly. See § 3.3.5.

3. Flush all air out of the pumps. See § 4.3.

4.3 Flushing the air out of the pump

1. Flush the air out of the pump:

- Use the air flushing command in the dispense software.

- If the dispense software does have an air flushing

command option or is not able to flush the air out of the

pump automatically, dispense 120 ml / 3 oz. Repeat the

action until all air is out of the pump.

Note

For the unpacking and installation procedures,

refer to the separate installation instruction sheets.

Note

Before the first use it is important that all air is

removed from all individual pumps.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Fast-fluid X-Smart User Manual Page 19